Quick answer
To refill your Touchland mist case, remove the original bottle, pour your chosen hand sanitizer into the empty case, and snap the mist nozzle back on securely.
Why refill instead of replace?
Refilling your mist case saves money and reduces plastic waste. Touchland cases like the Purple Haze Mist Case and Icy White Mist Case are designed to be durable and reusable, so you can swap sanitizer scents without buying a whole new bottle.


What you need before you start
You'll need your empty Touchland mist case, a bottle of hand sanitizer or refill liquid, a small funnel (optional but helpful), and a clean, dry surface. Avoid using thick gels—they won't spray properly through the mist nozzle.
Step-by-step refill process
- Remove the nozzle: Twist the mist nozzle counterclockwise until it comes off the case. Set it aside on a clean surface. Common mistake: pulling straight up can damage the nozzle stem. Always twist, never yank.
- Empty any remaining liquid: Pour out any leftover sanitizer into a sink or waste container. Tilt the case upside down and tap gently to drain completely. Checkpoint: residue can clog the nozzle, so make sure the case is fully empty.
- Fill the case with new sanitizer: Using a funnel or a steady hand, pour your refill sanitizer into the case until it's about 90% full. Leave a small air gap for the pump to work. Common mistake: overfilling causes leaks when you reattach the nozzle. Fill to 90% to avoid spills.
- Reattach the nozzle: Screw the mist nozzle back on clockwise until it's snug but not overtightened. Give the case a gentle shake to mix. Checkpoint: test the spray once—if it sputters, the nozzle may be loose or clogged. A smooth mist means a good seal.
Products that work with this guide
- Crocs x Touchland Hand Mist Case Cosmic White: The Crocs x Touchland Hand Mist Case in Cosmic White is a protective accessory designed to hold your favorite Touchland hand mist. Its snug fit means you can refill it repeatedly without worrying about the bottle shifting or leaking.



